Two questions about battery charging in my CLIX-1.
1) If I interrupt the charging cycle by disconnecting it from the PC, how can I force it to resume charging? I can get the USB Connected message but don't know how to force it back to "charging".
2) At any given time, how can I tell how much of the battery charge remains?
Thanks
-CBJohnson

1) Clix will charge when it believe it needs to, there is no need to force it.

2) Full battery = 100->40%; Two bars left = 40->10%; One bar left = <10%.

__________________

Humm.... that means that if it's charged to, say, 50% when I inadvertently disconnect it, I can't get it up to 100% charge until "it decides" it needs to charge more, right? Absolutely no way to force it to charge more?
-CBJ

Wrong. If it is 50%, than it will want to charge the next time you plug it in. If it is 98%, than maybe it won't charge when you plug it in. There is a internal circuit that detect the voltage to determine when to charge.

__________________

From my experience when you connect your Clix to your computer it will charge the charging screen will come up if it's completely dead if not it will have USB connected and the battery symbol will come up with a lightning bolt in the middle and flash to signify charging if it is charged to 100% the symbol will turn yellow if you unplug and re-plug in immediately your U10 will start charging again until it get's back to 100%